RUNXIN F67C1
RUNXIN F67C1
The Runxin F67C1 is an automatic multiport filter valve designed for water treatment systems. It is primarily used for sand, activated carbon, or multi-media filtration in residential and light industrial settings.
As a timer clock-type valve, it triggers backwash and rinse cycles based on a pre-set schedule (in days or hours) rather than on water volume.
Specification
- Valve Type: Automatic Multi-Port Filter Valve
- Flow Capacity: 4 m³/h
- Mount Type: Top Mount
- Inlet/Outlet Size: 1" Female Thread
- Drain: 1" Female Thread
- Water Turbidity: <20 FTU
- Working Pressure: 0.15 - 0.6 MPa (1.5 - 6 bar)
- Water Temperature: 5°C - 50°C (41°F - 122°F)
- Mounting Base: 2.5"-8NPSM
- Riser Pipe: 1.05" Outside Diameter
- Filter Tank: 6" - 12"
Primary Applications
The F67C1 is designed for filtration applications, not water softening (it does not include a brine tank refill cycle). Common uses include:
- Residential filtration systems (sediment, rust, dirt removal).
- Activated Carbon filters (chlorine and taste/odor reduction).
- Quartz sand or silica sand filters.
- Reverse Osmosis (RO) pre-treatment systems.
- Swimming pool filtration equipment.
Three Working Modes:
- Service: Standard water filtration mode.
- Backwash: Reverses water flow to lift the filter bed and flush out trapped sediment through the drain.
- Fast Rinse: Rinses the filter media in the normal flow direction to settle it back down before returning to service.
Key Features
- Reliable Sealing: Uses high-degree pottery and corrosion-resistant gaskets for opening and closing, ensuring long-term durability and a leak-proof seal.
- Manual Override: Allows you to start a manual backwash cycle immediately by pressing the "Manual/Return" button if the filter requires extra cleaning.
- LED Display: A dynamic screen shows the current time, service status, and remaining days/hours until the next regeneration.
- Button Lock: Automatically locks the keypad after one minute of inactivity to prevent accidental setting changes.
- Note: To unlock, press and hold the Up and Down buttons simultaneously for 5 seconds.
- Power Outage Memory: Retains settings for up to three days if power is lost.
- Interlock Function: Can be connected in a series or parallel system, so only one valve regenerates at a time, maintaining water pressure across the system.
