RUNXIN F67P1
RUNXIN F67P1
The Runxin F67P1 is an automatic, time-clock-controlled multiport filter valve designed primarily for water filtration applications.
It is a top-mount valve that automates the backwashing and rinsing cycles for media filters, eliminating the need for manual operation.
Specification
- Valve Type: Time Clock Type
- Flow Capacity: 4 m³/h
- Mount Type: Top Mount
- Inlet/Outlet Size: 1" Female Thread
- Drain: 1" Female Thread
- Water Turbidity: <20 FTU
- Working Pressure: 0.15 - 0.6 MPa (1.5 - 6 bar)
- Water Temperature: 5°C - 50°C (41°F - 122°F)
- Mounting Base: 2.5"-8NPSM
- Riser Pipe: 1.05" Outside Diameter
- Filter Tank: 6" - 12"
Primary Applications
- Residential Filtration: Whole-house sediment or carbon filters.
- RO Pre-treatment: Protecting Reverse Osmosis membranes from chlorine and turbidity.
- Swimming Pool Equipment: Small-scale pool or pond filtration.
- Iron Removal: Often used with Birm or Manganese Greensand
Three Working Modes:
- Service: Standard water filtration mode.
- Backwash: Reverses water flow to lift the filter bed and flush out trapped sediment through the drain.
- Fast Rinse: Rinses the filter media in the normal flow direction to settle it back down before returning to service.
Key Features
The F67P1 is designed for simplicity and reliability in filtration systems. Here are its standout features:
- Button Lock: The keypad will automatically lock if there is no operation for one minute, preventing accidental changes to the settings. To unlock it, hold the Up and Down buttons for 5 seconds.
- Interlock Function: If you are running multiple filters in a series (e.g., a sand filter followed by a carbon filter), the interlock ensures only one valve is in backwash mode at a time to maintain system pressure.
- Signal Output: Includes a connector for remote handling or to trigger external equipment (like a booster pump or solenoid valve) during the rinse cycle.
- Manual Override: You can force an immediate backwash by pressing the Manual/Return button at any time.
